Order Can Am Dual Battery Kit Right Now Online

Good to know: with 18 additional amp hours, long rides feel different for lights and sound. More capacity means longer accessory runtime while safeguarding the starter.

This purpose-built upgrade uses an 80 amp isolator so, with the key on, both sources share power, and with the key off, the starting unit is safe while accessories draw from the second battery. Its heavy-duty mount resists vibration/impacts for real off-road use.

Arrives fresh, sealed AGM and fully charged and hardware sized to match your vehicle. The Can Am plow system is maintenance-free in daily use, but using a charger/maintainer helps prevent sulfation and lengthen life.

Shop online to confirm fitment and get fast shipping, minimizing downtime from order to install. You keep stock starting capacity and gain usable amp-hours for winch, lights, and audio everywhere you ride.

Why Choose a Can-Am Dual Battery Kit for Your Next Adventure

If you run lights and audio late, a second power source keeps the starter prepared. With an 80A isolator, Key ON combines sources; Key OFF isolates the starter so accessories draw from the auxiliary battery.

Run accessories without draining your stock battery

Drive light bars, audio, GPS, and heaters without draining the starter. You get steadier voltage to sensitive electronics, reducing dim and drop during load spikes.

Confident cranks with stock starting kept intact

An isolator-managed system preserves the stock battery so cranking stays strong after long accessory use.

• Extra reserve: The auxiliary cell adds amp-hour reserve for high-draw gear on trail or at camp.
• Reduced strain: Accessory offload eases stress on starter circuits and components.
• Automatic management: Automatic behavior via key position; no manual switch needed.

Key Features & Benefits of the Can-Am Dual Battery Kit

Here’s what the upgrade delivers for trails and daily reliability. Automatic control plus a rugged mount and sealed cells keep electronics powered while protecting the starter.

The 80 amp battery isolator links both power sources when the key is on and isolates the starter cell when the key is off. That automation stops accessories from draining the starter.

Rugged mounting bracket for vibration and hits

A reinforced bracket anchors components through washboard trails and hard landings. It resists loosening/fatigue so your install stays neat and serviceable.

UTV Stereo Platinum AGM: sealed, low-maintenance, long-life

The UTV Stereo Platinum Series AGM arrives fresh and fully charged. Sealed AGM construction resists spill/vibration and needs no routine maintenance.

Adds extra amp hours vs stock for lights, audio, and accessories

• Gain about 18 amp hours versus stock for longer runtime with lights and audio.
• Cleaner voltage under load helps preserve sound quality and lamp brightness at idle.
• The complete battery kit integrates with the factory system for a neat, durable install.

Model Fitment and Options for Can-Am Owners

Pick model-specific packages that match factory mounts and wiring paths.

Maverick X3 owners can opt for a full second-battery kit with wiring/hardware for a quick upgrade. Already own an AGM? UTV Stereo’s mount-only option gives a clean bracket for a tidy install.

Maverick X3 Options: complete kit or bracket-only

Pick a complete kit for fast setup or the bracket-only path when reusing an existing cell. Both approaches aim for a factory look and secure fit.

Defender: tailored 2nd battery kit that fits the stock compartment

The Defender kit is built to fit the stock space and preserve service access. That keeps factory clearances intact while adding reliable second battery capacity.

Already have an AGM? Choose bracket-only or wiring-only kits

Cut costs with mount + wiring when you own a spare AGM. It delivers pro routing and solid mounting without unnecessary parts.

Alternatives: DS18 wire/bracket-only and AKJ Offroad solutions

• Explore AKJ Offroad for another full package option.
• DS18 lists bracket/wire-only packages with free U.S. shipping advertised.
• All are engineered to model geometry for factory-look installs that hold up off-road.

Pick what fits your build—complete kit for convenience or modular parts to reuse gear. Clear fitment guidance cuts wrong orders and gets you the right parts first try.

In the Box: What You Get

A solid parts list shows exactly what arrives with your purchase and how each piece protects starting power while feeding accessories.

Choose a full package with a secondary agm battery or select the bracket-only route if you already own a compatible cell. Both options protect starting power and add capacity for lights/audio/recovery.

Main components

• Battery isolator relay (80A) for charge management between sources.
• Harness, model-specific, to simplify wiring and speed install.
• Power distribution hardware with fused taps to keep accessory feeds tidy.
• Reinforced bracket to secure components against vibration/impacts.
• Clear documentation for routing/termination of harness and distribution.

Item	Function	Benefit
Secondary AGM cell	Provides extra amp hours	Starter remains ready during accessory use
80A isolator relay	Manages charge and isolation	Prevents accessory draw from draining starter
Model harness	Connects components	Simplifies install and service access
Distribution block & hardware	Fused accessory feeds	Tidy fused circuits for lights/audio

All parts are selected for off-road use and sealed where needed to resist dust and moisture. Integration with existing charge/accessory circuits keeps routing tidy and reliable.

Installation Made Straightforward

Install is straightforward so your rig stays trail-ready with minimal downtime.

Prep a clear workspace and lay out the labeled parts. Mount the bracket, place the second cell, and route the harness to labeled terminals.

Simple Key ON/Key OFF behavior

The 80 amp isolator links both sources when the key is on and lets the starting cell remain battery isolated when the key is off. This isolator design allows isolate new accessory loads so your starter stays reserved after long stops.

Solid bracket placement with tidy harness routing

Follow factory paths, use clips, and add abrasion sleeves at pinch points. Use supplied hardware for clean grounds and fused distribution rather than daisy-chaining.

Step	What to do	Why it matters
Mount bracket	Bolt into reinforced points	Maintains clamp load under vibration
Place 2nd cell	Seat and fasten with clamp	Protects terminals and service access
Connect harness	Follow labeled leads and fuse points	Simplifies future upgrades and diagnostics

Most mechanically inclined owners finish this installation with basic tools. Properly rated isolator and cables stabilize delivery and protect the starter on extended rides.

Performance, Charging, and Long-Term Maintenance

Steady power keeps aftermarket UTV electronics performing under heavy loads. Proper charging and routine care make that reliability repeatable season after season.

Expect steadier voltage and improved performance for audio amps, winches, and high-output lights. The auxiliary AGM trims voltage dips on spikes, keeping sound clean and lights bright.

Prevent sulfation with a charger/maintainer

Regular charging with a quality maintainer prevents sulfation, which is the leading cause of capacity loss in agm battery designs. UTV Stereo recommends topping cells between trips to preserve capacity and extend lifespan.

• The system preserves stock battery health by isolating starting power when the key is off.
• When running, the alternator replenishes reserves for efficient recovery on long rides.
• Sealed, vibration-resistant AGM design curbs damage over rough terrain.

Aspect	Gain	Action
Performance	Stable voltage under load	Add a secondary AGM to support high-draw gear
Charging	Less capacity loss over time	Employ a quality charger/maintainer between outings
Long-term care	Extended service life	Do routine maintenance charging on sealed cells

Tip: Have a compatible maintainer ready to keep batteries topped. It cuts surprises and preserves next-morning starts on every trip.

Shipping, Support, and Ordering in the United States

Quick, dependable shipping helps you schedule installs without surprises.

Fast U.S. shipping plus order support on current inventory

Get fast U.S. shipping to upgrade your Can-Am without lengthy delays. DS18 lists free shipping on select U.S. orders, speeding lighter package delivery.

• Get responsive customer support to confirm fitment, inventory, and the right kit for your vehicle.
• Order complete packages or modular solutions—full kits or bracket/wire options.
• Many bundles include distribution points for accessories, reducing extra parts sourcing and speeding installation.

Clear product info and documentation help you stage tools before delivery. U.S.-based fulfillment shortens transit times so your project stays on schedule.

Area	Coverage	Why it helps
Shipping	Domestic transit speed; DS18 free ship on select	Reduces downtime and gets parts to your garage sooner
Support	Customer fitment checks and order status	Avoids wrong orders and speeds proper installs
Product options	Complete package or bracket-only/wire-only solutions	Pick the solution that matches your power goals and budget

Wrap-Up

Owners seeking steady power with easy install will find this second source delivers. An 80A isolator plus UTV Stereo Platinum AGM adds ~18 amp-hours vs stock and protects starting power.

Pick a complete kit or a bracket-and-wire option to match budget and timeline. Amp-rated isolation, fused distribution, and tidy harnessing make add-ons simple and reliable.

Expect improved charging behavior, stronger light/accessory performance, and fast U.S. shipping with friendly support. Use a maintainer with the new auxiliary AGM to preserve life between rides.